en
+7 4722 42-42-11 info@technoincom.ru Contact us

Examples of the products

Implementation of this technical solution gives you the following advantages:
  • reduction of the cost of trammel screens repair and replacement;
  • reduction of the number of mill stops for trammel screens repair and replacement.
Layout of the lining on the bucket is done individually, according to the results of inspection and detection of areas with the most severe wear, which allows:
  • choose the optimal thickness of wear-resistant overlay welding;
  • reduce bucket weight;
  • reduce the time required to install the lining;
  • reduce the cost of purchasing the lining.
Implementation of this technical process ensures the following advantages:
  • significant reduction of the cost of bends repair and replacement;
  • up to 9 times increase in the service life.
The use of wear-resistant two-layer sheets makes it possible to increase the inter-repair period and the service life of manifolds at least 4 times.
Grates made of wear-resistant two-layer sheets make it possible to increase the service life of this equipment 3 or more times. Implementation of this technical solution gives you the following advantages:
  • reduction of the cost of grates repair and replacement;
  • increase in the inter-repair period.
Overlay welding of flux-cored wire on the inner surface of the pipes makes it possible to increase the period of repair-free operation of slurry pipelines, ash removal and slag removal pipes 5-7 times.
We produce wear-resistant sheets of various geometric shapes and sizes, with different properties of the overlay welded metal. Ready-made sheets are used for lining of surfaces and making wear-resistant structures. The thickness of the overlay welded layer is 2.5 to 10 mm.
The production of a reinforced air blower volute made from an overlay welded wear-resistant sheet which operates under conditions of increased dust abrasion, including that at high temperatures, ensures significant increase in the service life of the equipment.
Wear-resistant overlay welding ensures both increased resistance to abrasive wear and corrosion resistance. Repeated restoration of screw conveyors is possible.
The choice of the overlay welded metal type and the specialized technology of overlay welding of wear-resistant bimetallic sheets used in the manufacture of cones ensures high resistance of finished products to abrasive wear.
The use of wear-resistant two-layer sheets makes it possible to increase the inter-repair period and the service life of the SUMP bodies at least 4 times.
Implementation of this technical solution gives you the following advantages:
  • reduction of the cost of blades repair and replacement;
  • increase in the inter-repair period.
The service life of the hydrocyclone with wear-resistant coating manufactured by Tekhnoinkom is 24 months, which is 6 times longer than the service life of the cyclone without wear-resistant overlay welding. In addition to direct saving, the company receives supplementary saving as it doesn’t have to make repairs, involve repair crews and lose efficiency.
Bimetallic plates used in the manufacture of the breeze bin can increase the service life of the breeze bin. Bimetallic plates used in the manufacture of the breeze bin can increase at least 4 times the breeze bin service life without stopping for repair work.
Implementation of this technical solution gives you the following advantages:
  • reduction of the costs of repair and replacement of pipelines and pump contractors;
  • reduction of emergency downtime of pumping stations;
  • increase in the equipment efficiency in the slurry workshop by reducing the number of repairs and replacement of pipeline components and contractors.
Implementation of this technical process ensures the following advantages:
  • reduction of the cost of wheels repair and replacement;
  • up to 5 times increase in the wheels service life.
Lining on the bucket provides the complete protection against the abrasive wear and minimizes the destructive effects of abrasive material on the all main elements of the miner loader bucket. The necessity of the lining on the bucket can be caused by the next factors:
  • the regular interaction with the rock formation;
  • the regular interaction with the abrasive soils.

Industry solution

Our company is mainly specialized in increasing wear resistance of machine and equipment parts for industrial enterprises engaged in mining and processing of minerals. Our customers are factories and enterprises that extract and process:

  • ferrous and non-ferrous metal ores;
  • mineral and ferroalloy ores;
  • coal;
  • oil;
  • precious and rare-earth metals;
  • lime, crushed stone and sand.

Besides, we develop and implement solutions for metallurgical plants, cement, glass and brick factories, enterprises manufacturing building materials, waste disposal plants, agricultural enterprises, chemical industry facilities.

We are interested in developing, and we are ready to consider applications related to solution of the problem of equipment, assemblies and parts wear.

Ask a Question

Please fill in all the information in the form.